1. Puerto Rico
  2. All 3M Products

3M™ Scotch-Weld™ Epoxy Potting Compound DP270

3M ID 62326614351
    Specifications
    Adhesive Type
    Epoxy
    Brand
    Scotch-Weld™
    Design Challenges
    Noise Vibration & Harshness Control NVH
    Flame Retardant
    UL94 HB
    Full Cure
    48 Hours @ 72 F (22 C)
    Hardness
    83 Shore D
    Indoor/Outdoor
    Both
    Industries
    Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicle, Transportation, Woodworking
    Mix Ratio Volume Base:Accelerator
    1 : 01
    Open Time
    60 minutes @ 72 F (22 C)
    Physical Form
    Liquid
    Position
    Good
    Product Form
    Each
    Product Type
    Epoxy Adhesive
    Shear Strength at 72 Degrees F (22 Degrees C)
    2500 psi
    Shelf Life in Months (from date of manufacture)
    15
    Specific Gravity
    1.06
    Storage Temperature
    60-80 F (16-27 C)
    Units per Case
    12
    Viscosity
    Self-Leveling
    Viscosity Range (cps) at Room Temperature
    12,000
    Product Details

    3M™ Scotch-Weld™ Epoxy Potting Compound DP270 is a rigid, two-part epoxy adhesive potting compound. 1:1 mix ratio, 70 minute work life and handling strength in approximately 3 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).

    3M™ Scotch-Weld™ Epoxy Potting Compound DP270 is low viscosity for easy dispensing and potting. Non-corrosive to copper, non-exotherming and high flow. For potting and bonding electronic and electrical components.